Developed with input from both printers and OEM's, the PressMate VC-01 has been specifically designed to give reliable circulation of water based and UV varnishes to the coating unit during the press run and a fast, easy to run wash-up cycle once the job is complete.
The PressMate VC-01 can be fitted to supply coating units equipped with either a chamber doctor blade system or rollers.
The unit works on a simple 4-stage program cycle set on the front of the machine. At system start up the unit is set to 'purge' to remove excess cleaning water from the previous cycle. The operator then switches the unit to 'run' mode to circulate the varnish. On completion of the job the unit is changed to 'drain' to remove the excess varnish from the system and finally is set to 'wash' to clean the coating unit using the PressMate VC-01's internal heated water reservoir.
The supply of varnish is taken direct from the manufacturers container thus avoiding secondary handling and the PressMate VC-01 is fitted with external level sensors to ensure that the coating unit is filled with the optimum level of varnish at all times.
All MGE print equipment is assembled in accordance with ISO9001 Quality Management System and European CE Legislation.
